英亚全站APP

你现在的位置:英亚全站APP>企业动态>

如何做双组份打胶机的日常维护工作

浏览:
在时代发展迅猛的过程中,越来越多的工厂使用双组份打胶机来为自己增加产能和产品品质,那你们知道它的日常维护保养工作是怎样子的呢?小编带你一起来学习一下如何做济南双组份打胶机的日常的维护工作吧。
In the process of rapid development of the times, more and more factories use two-component gluing machines to increase their production capacity and product quality. Do you know how their daily maintenance work is? Xiaobian will take you to learn how to do the daily maintenance of Jinan two-component gluing machine.
每天工作结束后,应该把设备的机身擦拭干净,这样会是设备美观更持久一些;
At the end of each day's work, the body of the equipment should be cleaned, so that the equipment will be more beautiful and lasting;
每天工作结束后都要排放油水分离器积聚油水;
Drain the oil and water accumulated in the oil-water separator after work every day;
我们要时常不定时地检查一下气路油雾器的润滑油情况,要保证气动元件的润滑;
We should check the lubricating oil of the oil mist atomizer of the air circuit from time to time to ensure the lubrication of the pneumatic components;
如果不再连续工作的话,就应该立刻马上把胶枪里的残留胶水给清除干净;
If you don't work continuously, you should immediately remove the residual glue in the glue gun;
在工作的过程中我们要注意以下各个压力表的读数是否都正常,不然会造成产品品质的不良和妨碍正常的生产效率;
In the process of work, we should pay attention to whether the readings of the following pressure gauges are normal, otherwise it will cause poor product quality and hinder normal production efficiency;
每天工作结束之后一定要做好工作日记,方便以后筛查问题所在。
At the end of each day's work, you must keep a work diary so that you can screen the problems in the future.
济南双组份打胶机
双组份打胶机的维护保养工作两个等级,分别是一级和二级,现在先来说说一级的维护保养工作:每个周都要检查机械运动部件的连接情况和润滑情况,如果润滑度不够记得要添加润滑脂;每隔15个工作日就要清洗一次混合器,也可以是半个月清洗一次。
The maintenance of the two-component gluing machine is divided into two levels, i.e. level 1 and level 2. Now let's talk about level 1 maintenance: check the connection and lubrication of mechanical moving parts every week. If the lubrication is not enough, remember to add grease; The mixer should be cleaned every 15 working days or half a month.
接下来就是二级的维护保养工作:每个月都要更换配件有油雾器、安全阀和主泵、配比泵的润滑油等;每个月都要把过滤器、针阀清洗一次,还要检查一次安全阀的泄压压力;每年把主泵、配比泵和辅料泵以及安全阀都清洗一次。
Next is the second level maintenance work: the accessories to be replaced every month include oil mist, safety valve and lubricating oil of main pump and proportioning pump; Clean the filter and needle valve once a month, and check the relief pressure of the safety valve; Clean the main pump, proportioning pump, auxiliary material pump and safety valve once a year.
以上就是我们要说的双组份打胶机的维护保养工作,您可以作为参考使用,还是要根据您机器的实际情况来做维护工作,更多问题的咨询就来我们网站http://upstudio.com.cn看看吧。
The above is what we want to say about the maintenance of the two-component gluing machine. Can you use it as a reference, or should you do the maintenance according to the actual situation of your machine? For more questions, please come to our website http://upstudio.com.cn Take a look.

上一篇:自动打胶机分别配置多头跟单头的原因
下一篇:最后一页

  • 官方微信