英亚全站APP

你现在的位置:英亚全站APP>企业动态>

解析打胶机打胶不满的问题

浏览:
双组份打胶机在打胶过程中可能会遇到各种各样的问题,今天我们就专门针对双组份打胶机打胶过程中,打胶不饱满的问题来进行解析。
The two-component gluing machine may encounter various problems during the gluing process. Today, we will analyze the problem of insufficient gluing during the gluing process of the two-component gluing machine.
一、打胶速度导致双组份打胶机打胶不饱满:
1、 The gluing speed causes the two-component gluing machine to be not full:
双组份打胶机作为设备,很多问题都具有共通性。调整打胶速度是很多中小玻璃加工企业的必备选择,为了加快自己的生产节奏,追赶自己的工期,所以会将双组份打胶机的打胶速度调快。
As a equipment, many problems of two-component gluing machine are common. Adjusting the gluing speed is a necessary choice for many small and medium-sized glass processing enterprises. In order to speed up their own production rhythm and catch up with their own construction period, the gluing speed of the two-component gluing machine will be adjusted faster.
随着被调快的速度,很多打胶问题就不可避免地出现了。打胶速度人为调整的过快,导致胶体还没有完全达到合格标准机头就已经移动到下一个位置进行打胶操作了。所以就会出现双组份打胶机在打胶过程中出现的打胶不饱满的问题。
As the speed is adjusted faster, many problems of gluing inevitably appear. The gluing speed is manually adjusted too fast, which causes the head to move to the next position for gluing before the colloid has fully reached the qualified standard. Therefore, there will be the problem that the two-component gluing machine is not full in the gluing process.

双组份打胶机

双组份打胶机打胶速度过快,导致打胶不饱满的解决办法:
The two-component gluing machine is too fast, resulting in insufficient gluing solution:
如果我们需要加快打胶的速度,调整了打胶机的移动参数的话,那么我们对应的也应该对供胶系统也进行相应的设置,比如这时候我们就需要加大供胶压力,增大打胶机的出胶速度来配合对象的移动速度的增加。如果我们仅仅是单独的增加了打胶机的移动速度而没有对压力进行调节的话就很有可能出现打胶不饱满的情况发生。
If we need to speed up the gluing speed and adjust the movement parameters of the gluing machine, we should also set the glue supply system accordingly. For example, at this time, we need to increase the glue supply pressure and increase the glue output speed of the gluing machine to match the increase of the movement speed of the object. If we only increase the moving speed of the gluing machine without adjusting the pressure, it is likely that the gluing is not full.
二、供胶压力的不足导致双组份打胶机打胶不饱满:
2、 Insufficient glue supply pressure leads to insufficient glue application of two-component glue applicator:
我们知道双组份打胶机在打胶过程中,要靠压力将双组份硅酮胶挤出来打胶。如果压力太小的话,就会导致在打胶过程中,出胶过少打胶不饱满。
We know that the two-component silicone glue is squeezed out by the pressure during the process of the two-component gluing machine. If the pressure is too small, it will lead to too little glue and insufficient glue during the gluing process.
这个时候我们就需要加大供胶压力,增大打胶机的出胶速度来配合对象的移动速度的增加。如果我们没有对压力进行调节的话就很有可能出现打胶不饱满的情况发生。这时候我们仅仅需要调整供胶压力即可很好的解决这个问题的发生。
At this time, we need to increase the glue supply pressure and increase the glue delivery speed of the glue applicator to match the increase of the moving speed of the object. If we do not adjust the pressure, it is very likely that the gluing is not full. At this time, we only need to adjust the glue supply pressure to solve this problem.
其实关于双组份打胶机出现的打胶不饱满的问题,主要可能有以上几种原因导致的,希望能对大家起到帮助。更多问题的了解就来我们网站http://upstudio.com.cn咨询看看吧。
As a matter of fact, the problem that the two-component gluing machine is not full may be caused by the above reasons. I hope it can help you. For more information, please visit our website http://upstudio.com.cn Let's consult.

上一篇:打胶机工作完后中空胶固化慢的原因
下一篇:自动打胶机分别配置多头跟单头的原因

  • 官方微信